Fábrica Cibra-Pataias (Ci)

Fábrica Cibra-Pataias (Ci) is a lime plant in Portugal with a reported capacity of 702,065 t of lime. It calcines limestone into quicklime in high-temperature kilns. By capacity it ranks #3 of 5 lime plants tracked in Portugal. It emits about 462,286 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 107,759 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38467604.

在上下文中：该设施如何比较

在702,065 t of lime时，Fábrica Cibra-Pataias (Ci)是Portugal中lime plant的中位数约 702,065 t of lime。 子部门：lime。 作为lime plant，它需要强烈的工艺热量（通常600–900°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 石灰厂在800-900°C的热窑中煅烧石灰石，热生石灰必须在隔热容器中处理，以防止与水分反应。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 462,286 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest lime plants in Portugal

Reported capacity (t of lime), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Fábrica Cibra-Pataias (Ci) sits in a warm-summer Mediterranean climate zone (Köppen Csb), at 39.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #3 largest of 5 lime plants in Portugal by reported capacity.

Nearby industrial sites

• Cibra-Pataias Cement Plant · Cement Plant · 326,594 t CO₂
• Maceirla-Liz Cement Plant · Cement Plant · 508,322 t CO₂
• Fábrica Maceira-Liz (Ci) · Lime Plant · 772,821 t CO₂
• Crisal Cristalaria · Textiles · 2,714 t CO₂
• Promor-Abastecedora De Produtos Agro-Pecuários, S.A. (Ci) · Food & Beverage · 280,824 t CO₂
• Calcidrata - Indústrias De Cal, S. A. (Ci) · Lime Plant · 264,680 t CO₂

Location

Coordinates 39.6578, -8.98477. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions