Fatextil - Malhas E Confecções, Lda.

Fatextil - Malhas E Confecções, Lda. is a textile mill in Portugal with a reported capacity of 108,392,857 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #106 of 112 textile mills tracked in Portugal. It emits about 2,714 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 633 cars. Its CO₂ per unit of capacity is about 14% above the median textile mill.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38479370.

在上下文中：该设施如何比较

在108,392,857 USD时，Fatextil - Malhas E Confecções, Lda.是Portugal中textile mill的中位数约 108,392,857 USD。 子部门：textiles-leather-apparel。 作为textile mill，它需要强烈的工艺热量（通常60–150°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥，通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 2,714 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Portugal

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Fatextil - Malhas E Confecções, Lda. sits in a warm-summer Mediterranean climate zone (Köppen Csb), at 41.2°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #106 largest of 112 textile mills in Portugal by reported capacity.

Nearby industrial sites

• Dedepro Textile Solutions Lda. · Textiles · 2,714 t CO₂
• Vestire,Sa · Textiles · 2,714 t CO₂
• Boininvest, Lda · Textiles · 2,714 t CO₂
• J. Caetano & Filhas Lda · Textiles · 2,714 t CO₂
• Carvalhais E Ca Lda Galaxia · Textiles · 2,714 t CO₂
• Joaquim Ferreira Pinto Lda · Textiles · 2,714 t CO₂

Location

Coordinates 41.22425, -8.23655. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions