Edson M Girardelo - Eireli

Edson M Girardelo - Eireli is a textile mill in Argentina with a reported capacity of 19,302,191 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #34 of 35 textile mills tracked in Argentina. It emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars. Its CO₂ per unit of capacity is about 29% below the median textile mill.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38477252.

在上下文中：该设施如何比较

在19,302,191 USD时，Edson M Girardelo - Eireli是Argentina中textile mill的中位数低于 149,911,890 USD。 其单位容量的CO₂约为textile mill中位数的低于 29%。 子部门：textiles-leather-apparel。 作为textile mill，它需要强烈的工艺热量（通常60–150°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纺织厂使用工艺蒸汽进行染色、整理和干燥，通常需要在长时间运行期间进行严格的温度控制——持续的热损失会侵蚀利润。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 302 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Argentina

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Edson M Girardelo - Eireli sits in a humid subtropical climate zone (Köppen Cfa), at 26.3°S in the southern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #34 largest of 35 textile mills in Argentina by reported capacity.

Nearby industrial sites

• Debora Neves Minetto Martini - Me · Textiles · 302 t CO₂
• V M G Confeccoes - Eireli · Textiles · 302 t CO₂
• Shot Industria De Jeans Ltda · Textiles · 302 t CO₂
• Krindges Industrial S A · Textiles · 302 t CO₂
• R T Ciquelero Industria De Confecções Eireli · Textiles · 302 t CO₂
• Gatino - Industria De Confeccoes Ltda · Textiles · 302 t CO₂

Location

Coordinates -26.25248, -53.63756. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions