Drvenjača d.d. Pulp Mill

Drvenjača d.d. Pulp Mill is a pulp & paper mill in Croatia with a reported capacity of 21,276 t of pulp & paper. It turns wood or recovered fibre into pulp and paper, with large steam and drying loads. By capacity it ranks #2 of 2 pulp & paper mills tracked in Croatia. It emits about 11,498 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,680 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-44375550.

在上下文中：该设施如何比较

在21,276 t of pulp & paper时，Drvenjača d.d. Pulp Mill是Croatia中pulp & paper mill的中位数约 21,276 t of pulp & paper。 子部门：pulp-and-paper。 作为pulp & paper mill，它需要强烈的工艺热量（通常150–250°C）来进行其核心工业操作——必须通过锅炉、炉或直接燃烧供应的热量，通过未隔热的容器和管道的损失代表浪费的燃料。可拆卸模块化绝缘可以将这些损失减少80-96%，将表面冷却至≤45°C，投资回收期通常不到2年。 纸浆和造纸厂为制浆工艺和纸张干燥机发电自己的蒸汽，运行大型锅炉系统，其中热损失直接降低效率。

容量和CO₂强度比较从Climate TRACE工业设施数据计算得出；部门角色基于工程参考。

What 11,498 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest pulp & paper mills in Croatia

Reported capacity (t of pulp & paper), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Drvenjača d.d. Pulp Mill sits in a temperate oceanic climate zone (Köppen Cfb), at 45.3°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #2 largest of 2 pulp & paper mills in Croatia by reported capacity.

Nearby industrial sites

• INA Group Rijeka Refinery · Refinery · 561,413 t CO₂
• Recinko D.O.O. · Textiles · 3,435 t CO₂
• Intersocks D.O.O. · Textiles · 3,435 t CO₂
• Intersocks Confection Trata (Part Of Intersocks D.O.O.) · Textiles · 3,435 t CO₂
• Koromacno Cement Plant · Cement Plant · 116,746 t CO₂
• Beti D.D. · Textiles · 3,435 t CO₂

Location

Coordinates 45.29974, 14.72139. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions