Home / Asia / Vietnam / Textile mills / Transasia Tantec Limited

Transasia Tantec Limited

Textiles in Vietnam. Approximate location 11.02105, 106.31925.

TextilesVietnamCO₂ reported

Transasia Tantec Limited is a textile mill in Vietnam with a reported capacity of 149,911,890 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #40 of 499 textile mills tracked in Vietnam. It emits about 3,282 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 765 cars.

3,282t CO₂e / yr (Climate TRACE)
#442CO₂ rank in Vietnam

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38475582.

У контексті: як порівнюється це підприємство

При потужності 149,911,890 USD Transasia Tantec Limited — це приблизно медіана textile mill у Vietnam (149,911,890 USD). Підсектор: textiles-leather-apparel. Як textile mill, воно вимагає високотемпературного технологічного тепла (зазвичай 60–150°C) для основних промислових операцій — тепла, яке повинне подаватися котлами, печами або прямим спаленням, і втрати через неізольовані судини та трубопроводи представляють витрачене напразно паливо. Знімна модульна теплоізоляція може зменшити ці втрати на 80–96%, охолодивши поверхню обладнання до ≤45°C, з окупністю часто менше 2 років. Текстильні фабрики використовують технологічну пару для фарбування, обробки та сушки, часто потребуючи суворого контролю температури протягом тривалих циклів — постійні втрати тепла знижують прибутковість.

Порівняння продуктивності та інтенсивності CO₂ розраховано на основі даних промислових об'єктів Climate TRACE; роль сектору заснована на інженерних довідниках.

What 3,282 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

765cars driven for a year
428homes' annual energy use
54,700tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Vietnam

Din Sen Viet Nam Enterprise Co., Ltd: 149,911,890 USD149.9MDin Sen Vi…Branch Of Leading Star Viet Nam Garment Company Limited: 149,911,890 USD149.9MBranch Of …Star Fashion Co., Ltd.: 149,911,890 USD149.9MStar Fashi…Dinsen Vietnam Enterprise Co., Ltd (Long An): 149,911,890 USD149.9MDinsen Vie…Global Takson Vietnam Co., Ltd.: 149,911,890 USD149.9MGlobal Tak…Luckytex Soc Trang Viet Nam Co.Ltd: 149,911,890 USD149.9MLuckytex S…Hung Long Ii Garment Joint Stock Company: 149,911,890 USD149.9MHung Long …Dong Tien Joint Stock Company: 149,911,890 USD149.9MDong Tien …

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Transasia Tantec Limited sits in a tropical savanna climate zone (Köppen Aw), at 11.0°N in the northern hemisphere.

~26°Ctypical annual mean
~29°Ctypical warm-season
Tropical savanna: warm all year, with distinct wet and dry seasons

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #40 largest of 499 textile mills in Vietnam by reported capacity.

Nearby industrial sites

Location

Coordinates 11.02105, 106.31925. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,600 MWh/yr (≈ 320 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Transasia Tantec Limited?

Transasia Tantec Limited is a textile mill in Vietnam. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Transasia Tantec Limited?

Transasia Tantec Limited has a reported capacity of 149,911,890 USD.

How much CO₂ does Transasia Tantec Limited emit?

Transasia Tantec Limited emits about 3,282 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 765 cars. That ranks #442 among tracked facilities in Vietnam.

Where is Transasia Tantec Limited located?

Transasia Tantec Limited is in Vietnam, near coordinates 11.02105, 106.31925.

Built from open public data; no personal information. Operate this site? Request a correction or removal.