Home / Asia / Indonesia / Textile mills / Pt Dayup Indo

Pt Dayup Indo

Textiles in Indonesia. Approximate location -6.14337, 106.93083.

TextilesIndonesiaCO₂ reported

Pt Dayup Indo is a textile mill in Indonesia with a reported capacity of 95,789,473 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #106 of 166 textile mills tracked in Indonesia. It emits about 2,522 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 588 cars.

2,522t CO₂e / yr (Climate TRACE)
#183CO₂ rank in Indonesia

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38473449.

У контексті: як порівнюється це підприємство

При потужності 95,789,473 USD Pt Dayup Indo — це приблизно медіана textile mill у Indonesia (95,789,473 USD). Підсектор: textiles-leather-apparel. Як textile mill, воно вимагає високотемпературного технологічного тепла (зазвичай 60–150°C) для основних промислових операцій — тепла, яке повинне подаватися котлами, печами або прямим спаленням, і втрати через неізольовані судини та трубопроводи представляють витрачене напразно паливо. Знімна модульна теплоізоляція може зменшити ці втрати на 80–96%, охолодивши поверхню обладнання до ≤45°C, з окупністю часто менше 2 років. Текстильні фабрики використовують технологічну пару для фарбування, обробки та сушки, часто потребуючи суворого контролю температури протягом тривалих циклів — постійні втрати тепла знижують прибутковість.

Порівняння продуктивності та інтенсивності CO₂ розраховано на основі даних промислових об'єктів Climate TRACE; роль сектору заснована на інженерних довідниках.

What 2,522 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

588cars driven for a year
329homes' annual energy use
42,033tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Indonesia

Pt Cap Global Industry International: 95,789,473 USD95.8MPt Cap Glo…Pt. Cch Indonesia: 95,789,473 USD95.8MPt. Cch In…Pt. Lucky Textile Semarang (Plant 3), Lucky Textile Demak: 95,789,473 USD95.8MPt. Lucky …Pt Victory Apparel Semarang: 95,789,473 USD95.8MPt Victory…Pt. Teodore Pan Garmindo Unit 7: 95,789,473 USD95.8MPt. Teodor…Pt. Suryamandiri Tekstil Buana - Pulo Gadung: 95,789,473 USD95.8MPt. Suryam…Pt Selalu Cinta Indonesia: 95,789,473 USD95.8MPt Selalu …Pt. Saimoda Garmindo: 95,789,473 USD95.8MPt. Saimod…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Pt Dayup Indo sits in a tropical rainforest climate zone (Köppen Af), at 6.1°S in the southern hemisphere.

~26°Ctypical annual mean
~27°Ctypical warm-season
Tropical rainforest: hot and humid year-round with little seasonal variation

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #106 largest of 166 textile mills in Indonesia by reported capacity.

Nearby industrial sites

Location

Coordinates -6.14337, 106.93083. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,300 MWh/yr (≈ 260 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Pt Dayup Indo?

Pt Dayup Indo is a textile mill in Indonesia. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Pt Dayup Indo?

Pt Dayup Indo has a reported capacity of 95,789,473 USD.

How much CO₂ does Pt Dayup Indo emit?

Pt Dayup Indo emits about 2,522 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 588 cars. That ranks #183 among tracked facilities in Indonesia.

Where is Pt Dayup Indo located?

Pt Dayup Indo is in Indonesia, near coordinates -6.14337, 106.93083.

Built from open public data; no personal information. Operate this site? Request a correction or removal.