Home / South America / Brazil / Textile mills / Natalie Assad Garetti De Mattias Eireli

Natalie Assad Garetti De Mattias Eireli

Textiles in Brazil. Approximate location -20.81347, -49.51047.

TextilesBrazilCO₂ reported

Natalie Assad Garetti De Mattias Eireli is a textile mill in Brazil with a reported capacity of 19,302,191 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #622 of 1,732 textile mills tracked in Brazil. It emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars.

302t CO₂e / yr (Climate TRACE)
#1169CO₂ rank in Brazil

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38476577.

У контексті: як порівнюється це підприємство

При потужності 19,302,191 USD Natalie Assad Garetti De Mattias Eireli — це приблизно медіана textile mill у Brazil (19,302,191 USD). Підсектор: textiles-leather-apparel. Як textile mill, воно вимагає високотемпературного технологічного тепла (зазвичай 60–150°C) для основних промислових операцій — тепла, яке повинне подаватися котлами, печами або прямим спаленням, і втрати через неізольовані судини та трубопроводи представляють витрачене напразно паливо. Знімна модульна теплоізоляція може зменшити ці втрати на 80–96%, охолодивши поверхню обладнання до ≤45°C, з окупністю часто менше 2 років. Текстильні фабрики використовують технологічну пару для фарбування, обробки та сушки, часто потребуючи суворого контролю температури протягом тривалих циклів — постійні втрати тепла знижують прибутковість.

Порівняння продуктивності та інтенсивності CO₂ розраховано на основі даних промислових об'єктів Climate TRACE; роль сектору заснована на інженерних довідниках.

What 302 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

70cars driven for a year
39homes' annual energy use
5,033tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Brazil

Elaine Cristina Dos Reis Pinto: 19,302,191 USD19.3MElaine Cri…Aguia Confeccao Do Vestuario Ltda: 19,302,191 USD19.3MAguia Conf…Tegape Quimica Ltda: 19,302,191 USD19.3MTegape Qui…Mar & Mar Confeccoes Eireli Ё Me: 19,302,191 USD19.3MMar & Mar …Florismar Textil Ltda: 19,302,191 USD19.3MFlorismar …Confeccoes Tangaroa Ltda: 19,302,191 USD19.3MConfeccoes…Cotelav - Confeccoes E Lavanderia Limitada: 19,302,191 USD19.3MCotelav - …Fitas Elasticas Estrela Ltda: 19,302,191 USD19.3MFitas Elas…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Natalie Assad Garetti De Mattias Eireli sits in a tropical savanna climate zone (Köppen Aw), at 20.8°S in the southern hemisphere.

~26°Ctypical annual mean
~29°Ctypical warm-season
Tropical savanna: warm all year, with distinct wet and dry seasons

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #622 largest of 1732 textile mills in Brazil by reported capacity.

Nearby industrial sites

Location

Coordinates -20.81347, -49.51047. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 500 MWh/yr (≈ 100 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Natalie Assad Garetti De Mattias Eireli?

Natalie Assad Garetti De Mattias Eireli is a textile mill in Brazil. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Natalie Assad Garetti De Mattias Eireli?

Natalie Assad Garetti De Mattias Eireli has a reported capacity of 19,302,191 USD.

How much CO₂ does Natalie Assad Garetti De Mattias Eireli emit?

Natalie Assad Garetti De Mattias Eireli emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars. That ranks #1169 among tracked facilities in Brazil.

Where is Natalie Assad Garetti De Mattias Eireli located?

Natalie Assad Garetti De Mattias Eireli is in Brazil, near coordinates -20.81347, -49.51047.

Built from open public data; no personal information. Operate this site? Request a correction or removal.