Fimco Int — Textiles, Tunisia

Fimco Int is a textile mill in Tunisia with a reported capacity of 116,878,788 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #3 of 33 textile mills tracked in Tunisia. It emits about 5,260 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,226 cars. Its CO₂ per unit of capacity is about 106% above the median textile mill.

116,878,788USD

5,260t CO₂e / yr (Climate TRACE)

#15CO₂ rank in Tunisia

0.00t CO₂ per capacity unit

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38477215.

Bağlamda: bu tesis nasıl karşılaştırılır

116,878,788 USD'de, Fimco Int Tunisia'daki textile mill'lerin medyanı yaklaşık 116,878,788 USD'dir. Alt sektör: textiles-leather-apparel. textile mill olarak, temel endüstriyel işlemleri için yoğun proses ısısı (tipik olarak 60–150°C) gerektirir — kazanlar, fırınlar veya doğrudan yanma ile sağlanması gereken ısı, ve izolasyon yapılmamış kaplar ve boruların kayıpları harcanan yakıtı temsil eder. Modüler çıkarılabilir yalıtım bu kayıpları %80–96 oranında azaltabilir, yüzeyleri ≤45°C'ye soğutabilir, geri ödeme süresi genellikle 2 yıldan azdır. Tekstil fabrikaları, boyamacılık, bitirme ve kurutma için proses buharı kullanır; genellikle uzun çalıştırma süreleri boyunca sıkı sıcaklık kontrolü gerektirir — sürekli ısı kaybı karları aşındırır.

Kapasite ve CO₂ yoğunluğu karşılaştırması Climate TRACE endüstriyel tesis verilerinden hesaplanmıştır; sektör rolü mühendislik referansına dayanmaktadır.

What 5,260 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

1,226cars driven for a year

686homes' annual energy use

87,667tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Tunisia

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Fimco Int sits in a hot semi-arid steppe climate zone (Köppen BSh), at 35.6°N in the northern hemisphere.

~23°Ctypical annual mean

~31°Ctypical warm-season

Hot semi-arid steppe: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #3 largest of 33 textile mills in Tunisia by reported capacity.

Nearby industrial sites

Demcointer S.A.R.L. · Textiles · 5,260 t CO₂
New Corset · Textiles · 5,260 t CO₂
A@W Site 1 (Detis) · Textiles · 5,260 t CO₂
A@W Site 2 (Droes) · Textiles · 5,260 t CO₂
Mahdco Tunisie · Textiles · 5,260 t CO₂
Ste' Everwash Sarl · Textiles · 5,260 t CO₂

Location

Coordinates 35.55094, 10.87055. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

Up to 96% less heat loss from insulated surfaces
Surface temperature down to ≤45°C for worker safety
6× faster maintenance access — removable and refittable
Typical payback up to 2 years

See Inzonex process-equipment insulation →

Inzonex modular insulation on industrial equipment

Frequently asked questions

What type of facility is Fimco Int?

Fimco Int is a textile mill in Tunisia. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Fimco Int?

Fimco Int has a reported capacity of 116,878,788 USD.

How much CO₂ does Fimco Int emit?

Fimco Int emits about 5,260 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,226 cars. That ranks #15 among tracked facilities in Tunisia.

Where is Fimco Int located?

Fimco Int is in Tunisia, near coordinates 35.55094, 10.87055.

Built from open public data; no personal information. Operate this site? Request a correction or removal.