Textiles in Hong Kong. Approximate location 22.31857, 114.17961.
TextilesHong KongCO₂ reported
Cobalt Fashion Llc is a textile mill in Hong Kong with a reported capacity of 3,573,333 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #4 of 40 textile mills tracked in Hong Kong. It emits about 78 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 18 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38478931.
3,573,333 USD'de, Cobalt Fashion Llc Hong Kong'daki textile mill'lerin medyanı yaklaşık 3,573,333 USD'dir. Alt sektör: textiles-leather-apparel. textile mill olarak, temel endüstriyel işlemleri için yoğun proses ısısı (tipik olarak 60–150°C) gerektirir — kazanlar, fırınlar veya doğrudan yanma ile sağlanması gereken ısı, ve izolasyon yapılmamış kaplar ve boruların kayıpları harcanan yakıtı temsil eder. Modüler çıkarılabilir yalıtım bu kayıpları %80–96 oranında azaltabilir, yüzeyleri ≤45°C'ye soğutabilir, geri ödeme süresi genellikle 2 yıldan azdır. Tekstil fabrikaları, boyamacılık, bitirme ve kurutma için proses buharı kullanır; genellikle uzun çalıştırma süreleri boyunca sıkı sıcaklık kontrolü gerektirir — sürekli ısı kaybı karları aşındırır.
Kapasite ve CO₂ yoğunluğu karşılaştırması Climate TRACE endüstriyel tesis verilerinden hesaplanmıştır; sektör rolü mühendislik referansına dayanmaktadır.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Cobalt Fashion Llc sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 22.3°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #4 largest of 40 textile mills in Hong Kong by reported capacity.
Coordinates 22.31857, 114.17961. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 500 MWh/yr (≈ 100 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Cobalt Fashion Llc is a textile mill in Hong Kong. It spins, dyes and finishes textiles, leather or apparel using process steam.
Cobalt Fashion Llc has a reported capacity of 3,573,333 USD.
Cobalt Fashion Llc emits about 78 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 18 cars. That ranks #16 among tracked facilities in Hong Kong.
Cobalt Fashion Llc is in Hong Kong, near coordinates 22.31857, 114.17961.
