Rj Liebe Athletic Lettering Co.

Rj Liebe Athletic Lettering Co. is a textile mill in United States with a reported capacity of 463,021,579 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #18 of 139 textile mills tracked in United States. It emits about 13,256 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 3,090 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38474666.

В контексте: как это предприятие сравнивается

На мощности 463,021,579 USD Rj Liebe Athletic Lettering Co. — это примерно медианная textile mill в United States (463,021,579 USD). Подсектор: textiles-leather-apparel. Как textile mill, оно требует высокотемпературного технологического тепла (обычно 60–150°C) для основных промышленных операций — тепла, которое должно подаваться котлами, печами или прямым сжиганием, и потери через неизолированные сосуды и трубопроводы представляют потраченное впустую топливо. Съёмная модульная теплоизоляция может снизить эти потери на 80–96%, охладив поверхность оборудования до ≤45°C, с окупаемостью часто менее 2 лет. Текстильные фабрики используют технологический пар для крашения, отделки и сушки, часто требуя строгого контроля температуры во время длительных циклов — постоянные потери тепла снижают прибыльность.

Сравнение производительности и интенсивности CO₂ рассчитано на основе данных промышленных объектов Climate TRACE; роль сектора основана на инженерных справочниках.

What 13,256 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in United States

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Rj Liebe Athletic Lettering Co. sits in a humid subtropical climate zone (Köppen Cfa), at 38.7°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #18 largest of 139 textile mills in United States by reported capacity.

Nearby industrial sites

• U.S. Foods, Inc. · Food & Beverage · 4,154 t CO₂
• Greer Brewing Co Llc · Food & Beverage · 4,154 t CO₂
• Mikey'S Pour House Llc · Food & Beverage · 4,154 t CO₂
• Schreiber Foods, Inc. · Food & Beverage · 4,154 t CO₂
• The Rack House West Winery · Food & Beverage · 4,154 t CO₂
• The Hillshire Brands Company · Food & Beverage · 4,154 t CO₂

Location

Coordinates 38.66665, -90.63354. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 3,000 MWh/yr (≈ 600 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United States: funding & obligation

Funding. Investment tax credit up to 30% of qualified investment incl. industrial decarbonization; open to small/medium/large manufacturers.

Obligation. None at federal level (voluntary). Some states have their own programs. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions