Home / Europe / Italy / Textile mills / In Maglia Snc

In Maglia Snc

Textiles in Italy. Approximate location 43.37422, 12.2027.

TextilesItalyCO₂ reported

In Maglia Snc is a textile mill in Italy with a reported capacity of 487,373,737 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #111 of 198 textile mills tracked in Italy. It emits about 7,015 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,635 cars.

7,015t CO₂e / yr (Climate TRACE)
#150CO₂ rank in Italy

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38479659.

Em contexto: como esta instalação se compara

Com 487,373,737 USD, In Maglia Snc é em torno de a mediana de textile mill em Italy (487,373,737 USD). Subsetor: textiles-leather-apparel. Como textile mill, requer calor de processo intenso (tipicamente 60–150°C) para suas operações industriais centrais — calor que deve ser fornecido por caldeiras, fornos ou combustão direta, e as perdas através de vasos e tubulações não isolados representam combustível desperdiçado. O isolamento modular removível pode reduzir essas perdas em 80–96%, esfriando superfícies a ≤45°C, com payback geralmente inferior a 2 anos. As fábricas têxteis usam vapor de processo para tingimento, acabamento e secagem, frequentemente requerendo controle de temperatura apertado em longos tempos de execução — a perda de calor contínua corrói lucros.

Comparação de capacidade e intensidade de CO₂ calculada a partir dos dados de instalações industriais Climate TRACE; função do setor baseada em referência de engenharia.

What 7,015 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

1,635cars driven for a year
915homes' annual energy use
116,917tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Italy

Mr Accessori Srls: 487,373,737 USD487.4MMr Accesso…Manifattura Maiano Spa: 487,373,737 USD487.4MManifattur…Laboratorio Sartoriale Di Uberti Max: 487,373,737 USD487.4MLaboratori…Giuntini Spa: 487,373,737 USD487.4MGiuntini S…Emmequattro S.N.C.: 487,373,737 USD487.4MEmmequattr…Mf1: 487,373,737 USD487.4MMf1Davide Albertario Milano Srl: 487,373,737 USD487.4MDavide Alb…Confezioni Cam: 487,373,737 USD487.4MConfezioni…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

In Maglia Snc sits in a temperate oceanic climate zone (Köppen Cfb), at 43.4°N in the northern hemisphere.

~11°Ctypical annual mean
~18°Ctypical warm-season
Temperate oceanic: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #111 largest of 198 textile mills in Italy by reported capacity.

Nearby industrial sites

Location

Coordinates 43.37422, 12.2027. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,900 MWh/yr (≈ 590 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

Italy: funding & obligation

Funding. MIMIT plan (~EUR 12.7B): tax credits for efficiency/decarbonization investments (requires a certified energy diagnosis to access).

Obligation. Mandatory energy diagnosis every 4 yrs for large enterprises (>250 staff or >EUR 50M) and energy-intensive companies (>10 TJ/yr from 2026); ENEA penalties up to EUR 40,000. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions

What type of facility is In Maglia Snc?

In Maglia Snc is a textile mill in Italy. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of In Maglia Snc?

In Maglia Snc has a reported capacity of 487,373,737 USD.

How much CO₂ does In Maglia Snc emit?

In Maglia Snc emits about 7,015 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,635 cars. That ranks #150 among tracked facilities in Italy.

Where is In Maglia Snc located?

In Maglia Snc is in Italy, near coordinates 43.37422, 12.2027.

Built from open public data; no personal information. Operate this site? Request a correction or removal.