Polyformas, S.A.

Polyformas, S.A. is a textile mill in Guatemala with a reported capacity of 149,911,890 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #16 of 26 textile mills tracked in Guatemala. It emits about 3,282 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 765 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38469839.

文脈内で：この施設がどのように比較されるか

149,911,890 USDで、Polyformas, S.A.はGuatemalaのtextile millの中央値約 149,911,890 USDです。 サブセクター：textiles-leather-apparel。 textile millとして、その中核的な産業操業に対して激しいプロセス熱（通常60–150°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 繊維工場は、染色、仕上げおよび乾燥のためにプロセス蒸気を使用します。長時間の稼働中の厳密な温度制御が必要な場合が多く、継続的な熱損失は利益を蝕みます。

容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。

What 3,282 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Guatemala

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Polyformas, S.A. sits in a subtropical highland climate zone (Köppen Cwb), at 14.6°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #16 largest of 26 textile mills in Guatemala by reported capacity.

Nearby industrial sites

• Gse Guatemala, S.A · Textiles · 3,282 t CO₂
• Textitles Paraiso, S.A. - Santa Fe · Textiles · 3,282 t CO₂
• Seoul Print Guatemala Sa · Textiles · 3,282 t CO₂
• Fine Tex Y Best Print S.A. · Textiles · 3,282 t CO₂
• Corporacion Indyknit S.A. · Textiles · 3,282 t CO₂
• Texwin Serigrafia · Textiles · 3,282 t CO₂

Location

Coordinates 14.57569, -90.54685. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions