Textiles in Pakistan. Approximate location 24.9115, 67.00452.
TextilesPakistanCO₂ reported
Liberty Mills Limited Unit Lht-Ii is a textile mill in Pakistan with a reported capacity of 20,148,964 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #141 of 151 textile mills tracked in Pakistan. It emits about 441 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 103 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38472834.
20,148,964 USDで、Liberty Mills Limited Unit Lht-IiはPakistanのtextile millの中央値約 20,148,964 USDです。 サブセクター：textiles-leather-apparel。 textile millとして、その中核的な産業操業に対して激しいプロセス熱（通常60–150°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 繊維工場は、染色、仕上げおよび乾燥のためにプロセス蒸気を使用します。長時間の稼働中の厳密な温度制御が必要な場合が多く、継続的な熱損失は利益を蝕みます。
容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Liberty Mills Limited Unit Lht-Ii sits in a hot desert climate zone (Köppen BWh), at 24.9°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #141 largest of 151 textile mills in Pakistan by reported capacity.
Coordinates 24.9115, 67.00452. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 550 MWh/yr (≈ 110 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Liberty Mills Limited Unit Lht-Ii is a textile mill in Pakistan. It spins, dyes and finishes textiles, leather or apparel using process steam.
Liberty Mills Limited Unit Lht-Ii has a reported capacity of 20,148,964 USD.
Liberty Mills Limited Unit Lht-Ii emits about 441 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 103 cars. That ranks #153 among tracked facilities in Pakistan.
Liberty Mills Limited Unit Lht-Ii is in Pakistan, near coordinates 24.9115, 67.00452.
