Home / Africa / Tunisia / Textile mills / Grg Oficina Srl

Grg Oficina Srl

Textiles in Tunisia. Approximate location 36.68327, 10.58306.

TextilesTunisiaCO₂ reported

Grg Oficina Srl is a textile mill in Tunisia with a reported capacity of 116,878,788 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #26 of 33 textile mills tracked in Tunisia. It emits about 5,260 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,226 cars.

5,260t CO₂e / yr (Climate TRACE)
#30CO₂ rank in Tunisia

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38475836.

文脈内で:この施設がどのように比較されるか

116,878,788 USDで、Grg Oficina SrlはTunisiaのtextile millの中央値約 116,878,788 USDです。 サブセクター:textiles-leather-apparel。 textile millとして、その中核的な産業操業に対して激しいプロセス熱(通常60–150°C)が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80~96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 繊維工場は、染色、仕上げおよび乾燥のためにプロセス蒸気を使用します。長時間の稼働中の厳密な温度制御が必要な場合が多く、継続的な熱損失は利益を蝕みます。

容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。

What 5,260 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

1,226cars driven for a year
686homes' annual energy use
87,667tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Tunisia

Lamak: 116,878,788 USD116.9MLamakA@W Site 1 (Detis): 116,878,788 USD116.9MA@W Site 1…Fimco Int: 116,878,788 USD116.9MFimco IntBlue & Dye Sarl: 116,878,788 USD116.9MBlue & Dye…Vtl2: 116,878,788 USD116.9MVtl2New Corset: 116,878,788 USD116.9MNew CorsetSupply Chain Fashion: 116,878,788 USD116.9MSupply Cha…Benetton Manufacturing Tunisia: 116,878,788 USD116.9MBenetton M…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Grg Oficina Srl sits in a hot-summer Mediterranean climate zone (Köppen Csa), at 36.7°N in the northern hemisphere.

~17°Ctypical annual mean
~27°Ctypical warm-season
Hot-summer mediterranean: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #26 largest of 33 textile mills in Tunisia by reported capacity.

Nearby industrial sites

Location

Coordinates 36.68327, 10.58306. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,300 MWh/yr (≈ 460 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Grg Oficina Srl?

Grg Oficina Srl is a textile mill in Tunisia. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Grg Oficina Srl?

Grg Oficina Srl has a reported capacity of 116,878,788 USD.

How much CO₂ does Grg Oficina Srl emit?

Grg Oficina Srl emits about 5,260 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,226 cars. That ranks #30 among tracked facilities in Tunisia.

Where is Grg Oficina Srl located?

Grg Oficina Srl is in Tunisia, near coordinates 36.68327, 10.58306.

Built from open public data; no personal information. Operate this site? Request a correction or removal.