Textiles in Brazil. Approximate location -23.52349, -46.73811.
TextilesBrazilCO₂ reported
Global Brasil Tecnologia Em Quimica E Moda Ltda is a textile mill in Brazil with a reported capacity of 19,302,191 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #520 of 1,732 textile mills tracked in Brazil. It emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38475818.
19,302,191 USDで、Global Brasil Tecnologia Em Quimica E Moda LtdaはBrazilのtextile millの中央値約 19,302,191 USDです。 サブセクター：textiles-leather-apparel。 textile millとして、その中核的な産業操業に対して激しいプロセス熱（通常60–150°C）が必要です。この熱はボイラー、炉、または直接燃焼によって供給される必要があり、未断熱容器および配管からの損失は無駄な燃料を表します。モジュール式脱着可能な断熱は、これらの損失を80～96%削減でき、表面を≤45°Cに冷却でき、回収期間は通常2年未満です。 繊維工場は、染色、仕上げおよび乾燥のためにプロセス蒸気を使用します。長時間の稼働中の厳密な温度制御が必要な場合が多く、継続的な熱損失は利益を蝕みます。
容量およびCO₂強度の比較はClimate TRACEの産業施設データから計算されました。セクターの役割は工学リファレンスに基づいています。
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Global Brasil Tecnologia Em Quimica E Moda Ltda sits in a humid subtropical climate zone (Köppen Cfa), at 23.5°S in the southern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #520 largest of 1732 textile mills in Brazil by reported capacity.
Coordinates -23.52349, -46.73811. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 500 MWh/yr (≈ 100 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Global Brasil Tecnologia Em Quimica E Moda Ltda is a textile mill in Brazil. It spins, dyes and finishes textiles, leather or apparel using process steam.
Global Brasil Tecnologia Em Quimica E Moda Ltda has a reported capacity of 19,302,191 USD.
Global Brasil Tecnologia Em Quimica E Moda Ltda emits about 302 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 70 cars. That ranks #988 among tracked facilities in Brazil.
Global Brasil Tecnologia Em Quimica E Moda Ltda is in Brazil, near coordinates -23.52349, -46.73811.
