Home / Europe / Portugal / Textile mills / Fontoli-Confeções Têxteis,Lda

Fontoli-Confeções Têxteis,Lda

Textiles in Portugal. Approximate location 41.36992, -8.30788.

TextilesPortugalCO₂ reported

Fontoli-Confeções Têxteis,Lda is a textile mill in Portugal with a reported capacity of 108,392,857 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #14 of 112 textile mills tracked in Portugal. It emits about 2,714 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 633 cars.

2,714t CO₂e / yr (Climate TRACE)
#96CO₂ rank in Portugal

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38475677.

Nel contesto: come si confronta questo impianto

Con 108,392,857 USD, Fontoli-Confeções Têxteis,Lda è attorno a la mediana di textile mill in Portugal (108,392,857 USD). Sottosettore: textiles-leather-apparel. Come textile mill, richiede calore di processo intenso (tipicamente 60–150°C) per le sue operazioni industriali essenziali — calore che deve essere fornito da caldaie, forni o combustione diretta, e le perdite attraverso recipienti e tubazioni non isolati rappresentano carburante sprecato. L'isolamento modulare removibile può ridurre queste perdite dell'80–96%, raffreddando superfici a ≤45°C, con payback spesso inferiore a 2 anni. I mulini tessili utilizzano vapore di processo per la tintura, la rifinizione e l'asciugatura, spesso richiedendo un controllo della temperatura rigoroso in lunghe durate di funzionamento — la perdita di calore continua erode i profitti.

Confronto di capacità e intensità di CO₂ calcolato dai dati delle strutture industriali Climate TRACE; ruolo del settore basato su riferimento ingegneristico.

What 2,714 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

633cars driven for a year
354homes' annual energy use
45,233tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Portugal

Narciso Pereira Mendes, Herdeiros Lda: 108,392,857 USD108.4MNarciso Pe…Atb: 108,392,857 USD108.4MAtbMartiape Calcados, S.A.: 108,392,857 USD108.4MMartiape C…Araujo Irmaos Lda: 108,392,857 USD108.4MAraujo Irm…Barcelos Bordelos: 108,392,857 USD108.4MBarcelos B…Derma Leather, Sa: 108,392,857 USD108.4MDerma Leat…Acorfato - Industria De Confeccoes S.A: 108,392,857 USD108.4MAcorfato -…Mazoni Industria De Calcado, Sa: 108,392,857 USD108.4MMazoni Ind…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Fontoli-Confeções Têxteis,Lda sits in a warm-summer Mediterranean climate zone (Köppen Csb), at 41.4°N in the northern hemisphere.

~14°Ctypical annual mean
~21°Ctypical warm-season
Warm-summer mediterranean: four distinct seasons — cold winters and warm summers

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #14 largest of 112 textile mills in Portugal by reported capacity.

Nearby industrial sites

Location

Coordinates 41.36992, -8.30788. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 1,400 MWh/yr (≈ 280 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

EU: funding & obligation

Obligation. Under the EU Energy Efficiency Directive (Art. 8), large undertakings (>250 staff or >€50M turnover / >€43M balance) must run an energy audit every 4 years or operate a certified energy management system (ISO 50001).

Funding. National energy-efficiency grants and white-certificate schemes typically apply — check the local programme.

EED Article 8, transposed nationally. Confirm current national terms.

Frequently asked questions

What type of facility is Fontoli-Confeções Têxteis,Lda?

Fontoli-Confeções Têxteis,Lda is a textile mill in Portugal. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Fontoli-Confeções Têxteis,Lda?

Fontoli-Confeções Têxteis,Lda has a reported capacity of 108,392,857 USD.

How much CO₂ does Fontoli-Confeções Têxteis,Lda emit?

Fontoli-Confeções Têxteis,Lda emits about 2,714 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 633 cars. That ranks #96 among tracked facilities in Portugal.

Where is Fontoli-Confeções Têxteis,Lda located?

Fontoli-Confeções Têxteis,Lda is in Portugal, near coordinates 41.36992, -8.30788.

Built from open public data; no personal information. Operate this site? Request a correction or removal.