Textiles in China. Approximate location 22.95527, 113.48153.
TextilesChinaCO₂ reported
Maxkind Industrial Limited is a textile mill in China with a reported capacity of 319,572,427 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #795 of 1,848 textile mills tracked in China. It emits about 6,976 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,626 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38473351.
À 319,572,427 USD, Maxkind Industrial Limited est autour de la médiane des textile mill en China (319,572,427 USD). Sous-secteur: textiles-leather-apparel. Comme textile mill, elle nécessite une chaleur de procédé intensive (typiquement 60–150°C) pour ses opérations industrielles essentielles — chaleur qui doit être fournie par des chaudières, fours ou combustion directe, et les pertes par les récipients et tuyauteries non isolés représentent du combustible gaspillé. L'isolation modulaire amovible peut réduire ces pertes de 80–96%, refroidissant les surfaces à ≤45°C, avec des délais d'amortissement souvent inférieurs à 2 ans. Les usines textiles utilisent de la vapeur de procédé pour la teinture, l'apprêtage et le séchage, nécessitant souvent un contrôle strict de la température pendant de longues durées de marche — la perte de chaleur continue érode les profits.
Comparaison de capacité et d'intensité de CO₂ calculée à partir des données des installations industrielles Climate TRACE; rôle du secteur basé sur la référence d'ingénierie.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Maxkind Industrial Limited sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 23.0°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #795 largest of 1848 textile mills in China by reported capacity.
Coordinates 22.95527, 113.48153. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,900 MWh/yr (≈ 590 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:
CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.
Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.
Maxkind Industrial Limited is a textile mill in China. It spins, dyes and finishes textiles, leather or apparel using process steam.
Maxkind Industrial Limited has a reported capacity of 319,572,427 USD.
Maxkind Industrial Limited emits about 6,976 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,626 cars. That ranks #3799 among tracked facilities in China.
Maxkind Industrial Limited is in China, near coordinates 22.95527, 113.48153.
