Ace Sport S.R.O.

Ace Sport S.R.O. is a textile mill in Czechia with a reported capacity of 600,833,337 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #6 of 6 textile mills tracked in Czechia. It emits about 41,055 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 9,570 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38476920.

En contexte: comment cette installation se compare

À 600,833,337 USD, Ace Sport S.R.O. est autour de la médiane des textile mill en Czechia (600,833,337 USD). Sous-secteur: textiles-leather-apparel. Comme textile mill, elle nécessite une chaleur de procédé intensive (typiquement 60–150°C) pour ses opérations industrielles essentielles — chaleur qui doit être fournie par des chaudières, fours ou combustion directe, et les pertes par les récipients et tuyauteries non isolés représentent du combustible gaspillé. L'isolation modulaire amovible peut réduire ces pertes de 80–96%, refroidissant les surfaces à ≤45°C, avec des délais d'amortissement souvent inférieurs à 2 ans. Les usines textiles utilisent de la vapeur de procédé pour la teinture, l'apprêtage et le séchage, nécessitant souvent un contrôle strict de la température pendant de longues durées de marche — la perte de chaleur continue érode les profits.

Comparaison de capacité et d'intensité de CO₂ calculée à partir des données des installations industrielles Climate TRACE; rôle du secteur basé sur la référence d'ingénierie.

What 41,055 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in Czechia

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Ace Sport S.R.O. sits in a temperate oceanic climate zone (Köppen Cfb), at 49.3°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #6 largest of 6 textile mills in Czechia by reported capacity.

Nearby industrial sites

• Alena Cendelinova · Textiles · 41,055 t CO₂
• Závod Vodňany · Food & Beverage · 35,000 t CO₂
• Drůbežářský Závod Klatovy A. S. · Food & Beverage · 35,000 t CO₂
• Pivovar Plzeň · Food & Beverage · 35,000 t CO₂
• Radotin Cement Plant · Cement Plant · 410,815 t CO₂
• Pepsico Cz S.R.O. Praha · Food & Beverage · 35,000 t CO₂

Location

Coordinates 49.31362, 14.15913. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 3,000 MWh/yr (≈ 600 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

EU: funding & obligation

Obligation. Under the EU Energy Efficiency Directive (Art. 8), large undertakings (>250 staff or >€50M turnover / >€43M balance) must run an energy audit every 4 years or operate a certified energy management system (ISO 50001).

Funding. National energy-efficiency grants and white-certificate schemes typically apply — check the local programme.

EED Article 8, transposed nationally. Confirm current national terms.

Frequently asked questions