Textiles in Poland. Approximate location 52.09623, 19.93377.
TextilesPolandCO₂ reported
Gerpol Sp. Z O.O. is a textile mill in Poland with a reported capacity of 328,800,002 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #10 of 25 textile mills tracked in Poland. It emits about 6,465 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,507 cars.
Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38475710.
Con 328,800,002 USD, Gerpol Sp. Z O.O. está alrededor de la mediana de textile mill en Poland (328,800,002 USD). Subsector: textiles-leather-apparel. Como textile mill, requiere calor de proceso intenso (típicamente 60–150°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las fábricas textiles utilizan vapor de proceso para teñido, acabado y secado, a menudo requiriendo control de temperatura muy ajustado durante largos tiempos de funcionamiento — la pérdida de calor continua erosiona ganancias.
Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.
This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:
Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.
Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).
Gerpol Sp. Z O.O. sits in a temperate oceanic climate zone (Köppen Cfb), at 52.1°N in the northern hemisphere.
Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).
The #10 largest of 25 textile mills in Poland by reported capacity.
Coordinates 52.09623, 19.93377. View on OpenStreetMap.
A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.
effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.
On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 2,700 MWh/yr (≈ 550 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.
See Inzonex insulation → Estimate your site →
Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.
Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.
Obligation. Under the EU Energy Efficiency Directive (Art. 8), large undertakings (>250 staff or >€50M turnover / >€43M balance) must run an energy audit every 4 years or operate a certified energy management system (ISO 50001).
Funding. National energy-efficiency grants and white-certificate schemes typically apply — check the local programme.
EED Article 8, transposed nationally. Confirm current national terms.
Gerpol Sp. Z O.O. is a textile mill in Poland. It spins, dyes and finishes textiles, leather or apparel using process steam.
Gerpol Sp. Z O.O. has a reported capacity of 328,800,002 USD.
Gerpol Sp. Z O.O. emits about 6,465 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 1,507 cars. That ranks #169 among tracked facilities in Poland.
Gerpol Sp. Z O.O. is in Poland, near coordinates 52.09623, 19.93377.
