Danish Design Pet Products Ltd

Danish Design Pet Products Ltd is a textile mill in United Kingdom with a reported capacity of 139,411,765 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #48 of 68 textile mills tracked in United Kingdom. It emits about 9,186 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 2,141 cars.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38472855.

En contexto: cómo se compara esta instalación

Con 139,411,765 USD, Danish Design Pet Products Ltd está alrededor de la mediana de textile mill en United Kingdom (139,411,765 USD). Subsector: textiles-leather-apparel. Como textile mill, requiere calor de proceso intenso (típicamente 60–150°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las fábricas textiles utilizan vapor de proceso para teñido, acabado y secado, a menudo requiriendo control de temperatura muy ajustado durante largos tiempos de funcionamiento — la pérdida de calor continua erosiona ganancias.

Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.

What 9,186 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in United Kingdom

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Danish Design Pet Products Ltd sits in a temperate oceanic climate zone (Köppen Cfb), at 53.9°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #48 largest of 68 textile mills in United Kingdom by reported capacity.

Nearby industrial sites

• Abraham Moon And Sons Ltd · Textiles · 9,186 t CO₂
• Hammerton Street Chicken Processors · Food & Beverage · 19,860 t CO₂
• The Refinery · Food & Beverage · 19,860 t CO₂
• Infinity Apparel · Textiles · 9,186 t CO₂
• Batley Pet Foods · Food & Beverage · 19,860 t CO₂
• Jts Cushions Uk · Textiles · 9,186 t CO₂

Location

Coordinates 53.86601, -1.69142. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 3,000 MWh/yr (≈ 600 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

United Kingdom: funding & obligation

Funding. Grants for industrial energy efficiency / deep decarbonization in England, Wales, NI; min grant lowered to GBP 75k for SMEs.

Obligation. Mandatory for 'large undertakings': >=250 employees OR turnover >GBP 36M and balance sheet >GBP 18M. Qualification date 31 Dec 2026; compliance notification by 5 Dec 2027. (applies as a rule above the stated threshold — we don't hold this site's metered energy use).

Verified 2026; confirm current scheme terms before applying.

Frequently asked questions