Cma Laboratoires

Cma Laboratoires is a textile mill in France with a reported capacity of 1,735,555,553 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #3 of 9 textile mills tracked in France. It emits about 30,639 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 7,142 cars. Its CO₂ per unit of capacity is about 19% below the median textile mill.

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38478928.

En contexto: cómo se compara esta instalación

Con 1,735,555,553 USD, Cma Laboratoires está alrededor de la mediana de textile mill en France (1,735,555,553 USD). Subsector: textiles-leather-apparel. Como textile mill, requiere calor de proceso intenso (típicamente 60–150°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las fábricas textiles utilizan vapor de proceso para teñido, acabado y secado, a menudo requiriendo control de temperatura muy ajustado durante largos tiempos de funcionamiento — la pérdida de calor continua erosiona ganancias.

Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.

What 30,639 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in France

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Cma Laboratoires sits in a temperate oceanic climate zone (Köppen Cfb), at 46.1°N in the northern hemisphere.

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #3 largest of 9 textile mills in France by reported capacity.

Nearby industrial sites

• Haute-Savoie Department · Aluminium Smelter · 1,449 t CO₂
• Besnier Etaux · Food & Beverage · 36,510 t CO₂
• Cremo Sa · Food & Beverage · 2,118 t CO₂
• FERROPEM · Metals Plant · 234,000 t CO₂
• FERROPEM · Metals Plant · 192,000 t CO₂
• FERROPEM - USINE D'ANGLEFORT · Metals Plant · 243,000 t CO₂

Location

Coordinates 46.05652, 6.5562. View on OpenStreetMap.

Hot industrial equipment? Cut the heat loss.

Kilns, furnaces, boilers, heat exchangers, valves and steam lines on sites like this lose energy continuously. Inzonex makes patented removable modular insulation for hot industrial equipment:

• Up to 96% less heat loss from insulated surfaces
• Surface temperature down to ≤45°C for worker safety
• 6× faster maintenance access — removable and refittable
• Typical payback up to 2 years

See Inzonex process-equipment insulation →

Frequently asked questions