Home / Asia / India / Textile mills / Angel Leather Pvt Ltd

Angel Leather Pvt Ltd

Textiles in India. Approximate location 31.3313, 75.5198.

TextilesIndiaCO₂ reported

Angel Leather Pvt Ltd is a textile mill in India with a reported capacity of 22,089,034 USD. It spins, dyes and finishes textiles, leather or apparel using process steam. By capacity it ranks #91 of 753 textile mills tracked in India. It emits about 913 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 213 cars.

913t CO₂e / yr (Climate TRACE)
#491CO₂ rank in India

Facility data: Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0), id ct-38469727.

En contexto: cómo se compara esta instalación

Con 22,089,034 USD, Angel Leather Pvt Ltd está alrededor de la mediana de textile mill en India (22,089,034 USD). Subsector: textiles-leather-apparel. Como textile mill, requiere calor de proceso intenso (típicamente 60–150°C) para sus operaciones industriales centrales — calor que debe ser suministrado por calderas, hornos o combustión directa, y las pérdidas a través de recipientes y tuberías sin aislar representan combustible desperdiciado. El aislamiento modular desmontable puede reducir esas pérdidas en un 80–96%, enfriando superficies a ≤45°C, con amortización a menudo inferior a 2 años. Las fábricas textiles utilizan vapor de proceso para teñido, acabado y secado, a menudo requiriendo control de temperatura muy ajustado durante largos tiempos de funcionamiento — la pérdida de calor continua erosiona ganancias.

Comparación de capacidad e intensidad de CO₂ calculada a partir de datos de instalaciones industriales de Climate TRACE; papel del sector basado en referencia de ingeniería.

What 913 t CO₂e a year looks like

This facility's reported annual CO₂e in the everyday equivalents from the US EPA Greenhouse Gas Equivalencies calculator:

213cars driven for a year
119homes' annual energy use
15,217tree seedlings grown 10 years

Equivalencies: US EPA Greenhouse Gas Equivalencies. Emissions: Climate TRACE.

Capacity vs largest textile mills in India

Sai Laundry: 22,089,034 USD22.1MSai LaundryNew Delhi Export House: 22,089,034 USD22.1MNew Delhi …Sustainably Crafted Clothing Private Limited: 22,089,034 USD22.1MSustainabl…Rcjc: 22,089,034 USD22.1MRcjcGtm Industries Pvt Ltd: 22,089,034 USD22.1MGtm Indust…Geethalaya Knitting Division: 22,089,034 USD22.1MGeethalaya…Sahara: 22,089,034 USD22.1MSaharaShrinath Cotfab: 22,089,034 USD22.1MShrinath C…

Reported capacity (USD), Climate TRACE v6 (asset-level capacity & CO₂e, CC BY 4.0).

Local climate

Angel Leather Pvt Ltd sits in a humid subtropical (dry winter) climate zone (Köppen Cwa), at 31.3°N in the northern hemisphere.

~19°Ctypical annual mean
~27°Ctypical warm-season
Humid subtropical (dry winter): hot summers and mild winters

Köppen zone: Köppen-Geiger world climate classification (Kottek et al. 2006, 0.5° grid).

How it compares & nearby sites

The #91 largest of 753 textile mills in India by reported capacity.

Nearby industrial sites

Location

Coordinates 31.3313, 75.5198. View on OpenStreetMap.

Heat loss & insulation profile

A textile mill like this runs hot equipment that sheds heat continuously: dyeing vessels, stenters/dryers, steam lines, hot-water & boiler house (surface/process temperatures around 80–200 °C). These surfaces lose energy to the air year-round; removable modular insulation cuts that loss, brings outer surfaces to ≤45 °C, and unclips for inspection.

effectively industrial laundries/dyeing - steam & hot water; 500-3000 MWh typical.

Indicative recoverable energy

On an already-insulated site (pipes & valves in cladding / jackets), closing the remaining gaps, flanges and damaged sections and switching to removable covers indicatively recovers about 720 MWh/yr (≈ 140 t CO₂/yr) — scaled to this site's reported CO₂ within its sector. Bare or damaged surfaces recover several times more.

See Inzonex insulation → Estimate your site →

Indicative, not a measurement. Conservative floor for an already-insulated plant; a TIPCHECK on-site audit gives a measured figure. Industry context: EiiF TIPCHECK — industrial insulation can save ~14 Mtoe/yr in EU, payback typically <2 years.

Safety & the no-regret first step

Bare hot surfaces here exceed the touch-safe limit (EN ISO 13732-1); insulation to ≤45 °C is a worker-safety and compliance win. And before electrification, fuel-switching or CCS, eliminating surface heat loss is the cheapest, fastest, lowest-risk step — audit the bare spots first, rip-and-replace later.

External climate finance your country can access

Domestic energy-efficiency grants are limited here; industrial decarbonisation is mainly funded externally:

CBAM. Exporters of cement, steel, aluminium, fertiliser, hydrogen and electricity to the EU face the Carbon Border Adjustment Mechanism — cutting embedded emissions (efficiency + insulation) lowers the levy.

Routed via national development banks / accredited entities — not a direct factory grant. Verified 2026.

Frequently asked questions

What type of facility is Angel Leather Pvt Ltd?

Angel Leather Pvt Ltd is a textile mill in India. It spins, dyes and finishes textiles, leather or apparel using process steam.

What is the capacity of Angel Leather Pvt Ltd?

Angel Leather Pvt Ltd has a reported capacity of 22,089,034 USD.

How much CO₂ does Angel Leather Pvt Ltd emit?

Angel Leather Pvt Ltd emits about 913 tonnes of CO₂e per year (Climate TRACE) — roughly the tailpipe emissions of 213 cars. That ranks #491 among tracked facilities in India.

Where is Angel Leather Pvt Ltd located?

Angel Leather Pvt Ltd is in India, near coordinates 31.3313, 75.5198.

Built from open public data; no personal information. Operate this site? Request a correction or removal.